THERMODYNAMICS

p–v–T Surface of Pure Water

Drag to rotate in any direction · use the P–T / P–v / T–v buttons to flatten the surface into each projection
Created by Mazen Al-Ghoul

Real water: IAPWS reference curves

The 3D surface is drawn to schematic scale. These charts use the international reference equations: saturation pressure and densities from Wagner & Pruß (IAPWS-95 auxiliary equations), and sublimation and melting curves from IAPWS R14-08. Hover for exact values.

P–T phase diagram (log P), including high-pressure ices

SublimationMelting, ice IhMelting, ices III–VIIVaporization

P–v saturation dome (log–log)

Saturated liquidSaturated vapourTriple line
QuantityValueNote
Triple point273.16 K, 611.657 PaSolid, liquid and vapour coexist (a point in P–T, a line in P–v–T)
Critical point647.096 K, 22.064 MPa, 322 kg/m³vc = 3.106×10⁻³ m³/kg; above it there is no liquid–vapour distinction
Specific volumes at the triple pointliquid 1.0002×10⁻³ · ice Ih 1.0908×10⁻³ · vapour 206.0 m³/kgvice > vliquid, so ice floats (~9 % expansion on freezing)
Fusion-line slope (ice Ih)dP/dT ≈ −13.4 MPa/KClapeyron: dP/dT = Δhfus / (T Δv), with Δv < 0
Latent heats at the triple pointfusion 333.6 · vaporization 2500.9 · sublimation 2834.5 kJ/kgΔhsub = Δhfus + Δhvap
Normal boiling point373.124 K (99.974 °C) at 101.325 kPaOn the ITS-90 temperature scale
Ice Ih – III – liquid triple point251.165 K, 208.566 MPaLowest freezing temperature of liquid water in equilibrium (−21.985 °C)
In the 3D model, the “Real water” mode reproduces these signs and orderings (negative fusion slope, vliquid < vice < vvapour) on compressed axes. The “Generic substance” mode reproduces the classic reference figure, which is drawn like a substance that contracts on freezing. High-pressure ices (II–XIX) are omitted from the 3D surface. Only their melting curves appear above. Ice–ice transition lines are not shown.