In 1822, Jean-Baptiste Joseph Fourier formulated the fundamental law of heat conduction in Théorie analytique de la chaleur: the local heat flux q_x (W·m⁻²) is proportional to the negative local temperature gradient ∂T/∂x (K·m⁻¹):
Combining Fourier's Law with conservation of thermal energy yields the 1D Heat Conduction Equation across a rod of length L = 0.10 m (10 cm):
| State of Matter | Typical k [W/(m·K)] | Microscopic Mechanism of Fourier Conduction |
|---|---|---|
| Solid (Metals / Crystals) | 15 – 400 W/(m·K) |
Quantized lattice vibrations (phonons) and free conduction electrons propagate energy rapidly along interatomic spring bonds. |
| Liquid (Water / Oils) | 0.10 – 1.50 W/(m·K) |
Closely packed disordered molecules rattle in transient collisional cages, transferring momentum and kinetic energy via high-frequency short-range collisions. |
| Gas (Air / He / Ar) | 0.01 – 0.25 W/(m·K) |
Dilute molecules in ballistic flight over mean free path λ with thermal speed v_th ∝ √T: kinetic theory gives k = ⅓ n c_v v_th λ. |
| Experiment Mode | Physical Setup | Key Insight into Fourier's Law |
|---|---|---|
| 1. Transient → Linear Steady State | Uniform rod initially at 300 K suddenly contacted with T_L = 800 K at x = 0. |
Initially, ∂T/∂x is steep at x = 0 and zero at x = L, so heat enters faster than it leaves (∂T/∂t > 0). As t → ∞, curvature vanishes (∂²T/∂x² = 0), T(x) becomes a straight line, and q_x = k(T_L − T_R)/L is uniform everywhere. |
| 2. Composite 3-Layer Wall | Copper (k₁ = 380) | Ceramic Barrier (slider k₂) | Steel (k₃ = 120 W/(m·K)) in series. |
At steady state, heat flux q_x is identical across all three layers, so the temperature slope ∂T/∂x = −q_x / k(x) must be shallow in Copper and dramatically steeper inside the low-k₂ Ceramic insulation layer! |
| 3. Ångström's Thermal Wave | Sinusoidally oscillating left boundary T_L(t) = T̄ + ΔT sin(ωt). |
Launches an exponentially damped thermal wave with skin depth δ = √(2α/ω). Notice that the heat flux wave q_x(0,t) leads the surface temperature wave by 45° (π/4 rad). |
| 4. Thermal Contact Resistance | Two conductive blocks separated by a rough microscopic air gap at x = 5.0 cm with resistance R_c. |
Because air has very low conductivity, a finite heat flux q_x requires a sharp interfacial temperature jump ΔT_c = q_x · R_c right at the joint while q_x remains continuous. |
| 5. Internal Joule Heating | Uniform volumetric electrical heating q̇_gen > 0 inside the rod with cooled ends. |
Steady-state T(x) arches into an inverted parabola above the end temperatures, while Fourier flux q_x(x) = q̇_gen(x − x₀) varies linearly from negative (leftward out of left end) to positive (rightward out of right end). |